The most important thing is, that the remerged BIOS has exactly the same size and the same checksum-8 as the original one. The CPU Specifications submenu contains statistics on the currently active processor, including physical speed, multiplier, and cache settings. The base memory voltage setting, which also controls the scaling memory reference voltages, can by maxed out at 2. Thanks for all your help. The OC Genie Button Operation setting enables the use of the onboard OC Genie button, which dynamically overclocks the system when the button is pressed. Go to original post. I see from the above that there was no clear answer to the problem.
|Date Added:||4 July 2011|
|File Size:||12.14 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Regards Fernando My current System: What needs to be done to get the motherboard to communicate with the Raid enclosure through eSata? The most important thing is, that the remerged BIOS has exactly o55-gd65 same size and the same checksum-8 as the original one. The OC Genie Button Operation setting enables the use of the onboard OC Genie button, which dynamically overclocks the system when the button is pressed.
Fernando has attached files to this post AIMS. In addition, the various onboard fan headers can be set for static speed operation, with additional temperature based dynamic control available for the CPU fan header.
Finally I found you guys: All trademarks used are properties of their respective owners. No big deal, isn’t it? Note that the memory statistics listed are also viewable from the Main menu by pressing the F5 function key.
Note that most of the advanced timing settings listed are broken down in to these same three categories: The QPI Frequency settings shown can vary based on the current base clock speed, and is set through the use of preconfigured static ratio settings. I hope it works.
The Intel Raid drivers are already installed in the system. The user configurable advanced timing settings include the following: The submenu settings allow for custom naming of profiles, creation, loading, and profile setting deletion. Never touch a running system. MMorheus Show info Posts:.
Topic settings Print view. Moderators are not employees or representatives of HWZ. That works rair and is known properly in Windows. The Active Processor setting controls how many physical processors on the CPU are active, with options available as few or as many as desired. The Cell Menu contains all settings, housed in a mix of top level menu options and submenus, for controlling board performance and p555-gd65 related settings.
Go to original post. That’s kind of annoying.
P55 Raid 0 Setup Problem |Intel Communities
The JMicron driver is already installed, so I’m not sure what needs to be done. I’m not sure if this was somehow related to the underlying RAID array or what The base memory voltage setting, which also controls the scaling memory reference voltages, can by maxed out at 2. I p5-gd65 the performance would be better if I used 4 drives, but I have only two at present.
The Boot Sequence submenu lists the system boot device access order, with attached and detected USB 2. After that was enabled, I was able to install the JMicron JmB36x controller driver and things are good now. Thanks for any help. Please refer to our Terms of Service p55-gx65 more information. Zitat von MMorheus im Beitrag 1 Can somebody help me, please? When installing W7 another “first” for mewill I need to do that “install an optional RAID driver” step that has been required in prior Windows versions?